User Tools

Site Tools


tera_term_tutorial

Tera Term Tutorial

Tera Term allows your computer to communicate with the ZedBoard via a UART. This tutorial shows how to setup Tera Term for the ZedBoard.

  • The ZedBoard must be on for this to work.
  • Open Tera Term and select File → New Connection if the New Connection window does not automatically open.
  • Select Serial and choose the appropriate COM port as shown below. The name and/or number of the port may not match the one shown below. It may say “USB Serial Port” instead of “Cypress Serial”.
  • Click OK.

  • Select Setup → Serial Port and change your settings to match those shown below.

That is all! Tera Term should now be ready to receive or send data to the ZedBoard.

tera_term_tutorial.txt · Last modified: 2013/08/27 10:14 by jk374