User Tools

Site Tools


using_a_flash-drive

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

using_a_flash-drive [2014/09/15 09:00]
hutch
using_a_flash-drive [2016/08/30 14:16] (current)
hutch
Line 1: Line 1:
 ===== Using a FLASH-Drive ===== ===== Using a FLASH-Drive =====
-You can use a FLASH-Drive (instead of the J-Drive) if you want to achieve 2-3X faster compilation speeds than are possible with the J-Drive. If you decide to try this, make sure that your FLASH-drive is USB 2.0 and has a fast transfer speed. If you have an older FLASH-drive kicking around in the bottom of your backpack, it will probably be too slow to be useful. ​+You can use a FLASH-Drive (instead of the J-Drive) if you want to achieve 2-3X faster compilation speeds than are possible with the J-Drive. If you decide to try this, make sure that your FLASH-drive is USB 3.0 and has a fast transfer speed. If you have an older FLASH-drive kicking around in the bottom of your backpack, it will probably be too slow to be useful. ​
  
 Here are the steps if you want to try the FLASH-Drive:​ Here are the steps if you want to try the FLASH-Drive:​
using_a_flash-drive.txt ยท Last modified: 2016/08/30 14:16 by hutch