User Tools

Site Tools


zedboard_pin_map

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

zedboard_pin_map [2013/08/22 13:59]
jk374
zedboard_pin_map [2013/09/20 11:49] (current)
jk374
Line 76: Line 76:
 | SCK (clock) | JA10 | CLK | | SCK (clock) | JA10 | CLK |
  
- +Note for Instructors and TAs: The Vadj jumper on the board should be set to 1.8 V. This was the setting used in the UCF file. This only influences the switches and push buttons because the other external components are not powered by Vadj.
zedboard_pin_map.txt ยท Last modified: 2013/09/20 11:49 by jk374